Hysteresis :: aim investigate pattern amount hanging piece elastic stretches load force applied reduced removed simpler terms determine relationship rubber band both during extension retraction hypothesis required method 1 hang clamp stand ensure new 2 clamp ruler using ensuring markings close possible draw diagram 3 measure length record data 4 masses until essays research papers Hysteresis

Preview of Hysteresis:

Length: 1519 words (5.5 pages)
Rating: Yellow
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Aim: To investigate the pattern in the amount by which a hanging piece of elastic stretches when a load force is applied and the amount by which the stretch is reduced when the load is removed.

Aim (in simpler terms): To determine the relationship between the force on a rubber band and its stretch, both during extension and retraction.

Hypothesis: Not required.

Method
1)     Hang a piece of elastic on a clamp stand. Ensure the elastic is new.
2)     Clamp a ruler using the clamp stand. Ensuring the markings on the ruler is as close to the elastic as possible.
-     Draw a diagram
3) Measure the length of the elastic and record the data.
4) Hang masses on the elastic until it reaches it point of irreversible distortion. Take note of this weight; do not hang more than this weight in the experiment.
5)     Add a weight of 100N (change appropriately). Wait for a few seconds for the system to ?stabilise?. Measure the length of the elastic and record the data. Special care must be taken to ensure that when the mass is added the elastic should not retract.
6)     Add more weights, till the total weight is close to its point of irreversible distortion or till there are no more weights.
7)     Remove the weights one by one. Wait a couple of seconds for the system to ?stabilise?. Measure the length of the elastic and record the data... [to view the full essay now, purchase below]

Follow the instructions below to view the complete essay, speech, term paper, or research paper:

You may view this document now for only $11.95. This is the total cost - there are NO other charges. The document will be on your screen as soon as you pay with your credit card, debit card, or bank account. Your purchase is 100% secure.

I have read and agree to the Terms of Service below

Terms of Service
updated 20 August 2005

Welcome to Azete.com (the "Web Site"), which is produced by the "Company". This page states the Terms of Service (the "Terms" or the "TOS") under which this Web Site is available for use. Please read this page carefully. By accessing and using this Web Site you accept and agree to be bound, without limitation or qualification, by these Terms and any other terms and conditions that may apply. The Company may, at its sole discretion, modify or revise these Terms at any time by updating this posting. You are bound by any such modification or revision and should therefore visit this page periodically to review the Terms. By using the Web Site after we have made any modification or revision, you agree to be bound by the revised terms. If you do not accept any of the Terms stated here, do not use the Web Site. The Company retains the right to deny access to anyone at its complete discretion for any reason, including but not limited to violation of these Terms.

1. Web Site Usage
The contents of this Web Site, such as text, graphics, images, audio, video and all other material ("Material"), are protected by copyright under both United States and foreign laws, and are owned or controlled by third parties that have licensed their Material to the Company. Unauthorized use of the Material may violate copyright, trademark, and other laws. You must retain all copyright and other proprietary notices contained in the original Material on any copy you make of the Material. You may not sell or modify the Material or reproduce, display, publicly perform, distribute, or otherwise use the Material in any way for any public or commercial purpose. The use of the Material on any other Web Site, or in a networked computer environment for any purpose is prohibited, without the express written permission of the Company. The trademarks, logos, and service marks (the "Marks") displayed on the Web Site are owned by the Company. You are prohibited from use of those Marks without the express, written permission of the Company or such third party. If you would like information about obtaining permission from the company to use the Material on your Web site, please contact us via email. If you violate any of these Terms, your permission to use the Material will be automatically terminated and you must immediately destroy any copies you have made of the Material whether said copies are in your possession or in the possession of any third party.

2. Company's Liability
The Material on the Web Site contains inaccuracies and typographical errors. The Company makes no representations about the accuracy, reliability, completeness, or timeliness of the Material or about the results to be obtained from using the Web Site and the Material. You expressly agree that any use of the Web Site and the Material is entirely at your own risk. We reserve the right to make periodic changes to the Web Site, and these changes may be made at any time without notice. Most of the Material on the Web Site is provided and maintained by third parties. This third party Material may not be screened by the Company prior to its inclusion on the Web Site. You expressly agree that the Company is not liable or responsible for any defamatory, offensive, or illegal conduct of other subscribers or third parties.

The Company does not warrant that the Web Site will operate error-free or that the Web Site or its server is free of computer viruses or other harmful goods. If your use of the Web Site or its Material results in a need to repair or replace equipment or data, the Company is not responsible for those costs.

The Web Site and its Material are provided on an as-is basis without warranty express or implied. The Company and its suppliers and affiliates, to the fullest extent permitted by law, disclaim all warranties, including the warranty of non-infringement of proprietary or third party rights, and the warranty of fitness for a particular purpose. The Company and its suppliers make no warranties as to the accuracy, reliability, completeness, or timeliness of the material, services, text, graphics and links.

3. Disclaimer
IN NO EVENT SHALL THE COMPANY, ITS SUPPLIERS, OR ANY THIRD PARTIES MENTIONED AT THIS SITE BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, INCIDENTAL AND CONSEQUENTIAL DAMAGES, LOST PROFITS, OR DAMAGES RESULTING FROM LOST DATA OR BUSINESS INTERRUPTION) RESULTING FROM THE USE OR INABILITY TO USE THE WEB SITE AND THE MATERIAL, WHETHER BASED ON WARRANTY, CONTRACT, TORT, OR ANY OTHER LEGAL THEORY, AND WHETHER OR NOT THE COMPANY IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

4. Links to Other Web Sites
The Web Site contains links to third party Web sites maintained by others. These links are provided solely as a convenience to you and not as an endorsement by the Company of the contents on such third-party Web sites. The Company is not responsible for the content of linked third-party sites and does not make any representations on the content or accuracy of materials on such third-party Web sites. If you decide to access linked third-party Web sites, you do so at your own risk.

5. Limitation of Liability
Your use of the Web Site is at your own risk. If you are dissatisfied with any of the Materials or other contents of the Web Site or with these Terms and Conditions, your sole and exclusive remedy is to discontinue use of the Web Site.

Under no circumstances shall the Company be liable to any user on account of that user's use of the Web Site. Such limitation of liability shall apply to prevent recovery of any and all damages, including, without limitation, direct, indirect, incidental, consequential, special, punitive and exemplary damages arising from any use of the Web Site, including any damages that may be incurred by third parties.

6. Indemnity
You agree to defend, indemnify, and hold harmless the Company, its officers, directors, employees, and agents, from and against any claims, actions, or demands, including without limitation reasonable legal and accounting fees, alleging or resulting from your use of the Material or your breach of the terms of this Agreement.

7. User Information
The Company may use the information it obtains relating to you, including your IP address, name, e-mail address, mailing address, and use of the Web Site, for its business and marketing purposes. Your personal information will be treated in compliance with our Privacy Policy.

8. Minors
This Web Site contains material that may not be appropriate for minors. If there is concern by parents that children may visit this site, the Company recommends using a parental control software package. While no parental software package replaces careful supervision of Internet use by children, these tools can be a useful addition to your suite of Internet applications.

9. General
The Company makes no claims the Materials are appropriate for any particular purpose or audience, or that they may be downloaded outside of the United States. Access to the Materials may not be legal by certain persons or in certain countries. The Company is not responsible for any damages, claims or injuries that may result from unlawful or inappropriate access to the materials. If you access the Web Site from outside of the United States, you do so at your own risk and are responsible for compliance with the laws of any appropriate jurisdiction.

All legal issues arising from or related to the use of the Web Site shall be construed in accordance with and determined by the laws of the state of the Company applicable to contracts entered into and performed within the state of the Company without respect to its conflict of laws principles. By using this Web Site, you agree that the exclusive forum for any claims or causes of action arising out of your use of this Web Site is the Circuit Court nearest the county in which the Company is registered. You hereby irrevocably waive any objection that you may have to the venue of any such proceeding brought in such a court and any claim that any such proceeding brought in such a court has been brought in an inconvenient forum.

If any provision of this Agreement is found to be invalid by any court having competent jurisdiction, the invalidity of such provision shall not affect the validity of the remaining provisions of this Agreement, which shall remain in full force and effect. No waiver of any term of this Agreement shall be deemed a further or continuing waiver of such term or any other term. Failure to enforce any provision of this agreement or the Terms does not constitute a waiver for future enforcement of said Terms or terms of this agreement.

Search Our Free Database:
Please enter your keyword below:

ly most, Tears away the golden views, As golden dreams are shattered too. The ghosts tell stories of all who came - Dead, alive, blind, and lame. What he said I did not like, An unearthly hand will destroy the night, Killing all with demonic might. Down the tunnel of the soul, Broken bones...e a holy land and the Arabs want the land they fought for fifty-four years. Islam was found in the Middle East. This religion was started because of the founder of Islam Mohammad. Mohammad was born into poverty in Mecca. Mohammad parents died and was adopted by his uncle. He later married a rich wid...ble to be of the male race. Men have it easier in society, at work, and during life as a whole. First of all, women are more susceptible to discrimination and crime. In statistics from the U.S. Department of Justice, women, especially teenage girls, are the among the most frequent victims of ... about five years old and he looked well-bred.I hoped he would take me home. The next thing I knew,I was sitting in a plastic bag,in the black seat of a posh car,ready to be used by my new master.He was very excited at owning me and kept taking me out of the bag to examine me.I thought I was going t...